Abstract
Background: Fatty alcohol polyoxyethylene ether sulfonate (AESO) was synthesized
by the following two steps reactions: fatty alcohol polyoxyethylene ether 5 (AEO-5)
reacted with metallic sodium to form sodium alkoxide, then in toluene solvent, the sodium
alkoxide reacted with 2-chloroethyl sulfonate sodium to form AESO.
Methodology: The reaction factors, such as temperature, reaction time and reactant ratio,
which effect on the product yield were discussed. The products were characterized by Fourier
Transform Infrared (FTIR) spectra in order to examine the aim of the product synthesized.
The AESO performances including thermal stability, salt resistance, emulsifying and
surface properties were studied.
Results: The results show that the optimum conditions of AESO synthesis are as follows: the
reaction temperature is 64oC, the reaction time is 5h, the molar ratio of chloroethyl sulfonate
sodium and sodium alkoxide is 1.2:1. In the above reaction conditions, the AESO has the
highest yield, which is 74.43% and its purity is 89.25%. AESO’s surface properties, thermal
stability, and salt resistance are much better than that of fatty alcohol polyoxyethylene ether
sulfate (AES). The AESO presents the best emulsifying performance at the concentration of
1250mg/L.
Conclusion: The solubility of AES and AESO are all increased due to the EO groups’ existence
and their hard water resistances are better than that of lauryl sodium sulfate. The foamability
test shows that AESO has the best foaming ability at the concentration of 1480mg/L, which decreases
with the increase of the Ca2+ concentration, but the foam stability increases. It can be
seen that AESO has favorable resistance to high temperature and high salinity.
Keywords:
Alcohol Polyoxyethylene Ether Sulfonate (AESO), fatty alcohol polyoxyethylene ether
5(AEO-5), 2-chloroethyl sulfonate sodium, synthesis, performance, FTIR.
Graphical Abstract
[1]
Song B, Hu X, Shui X, et al. A new type of renewable
surfactants for enhanced oil recovery: Dialkylpolyoxyethylene
ether methyl carboxyl betaines Colloids
Surf a Physicochem Eng Asp 2016; 489.
[2]
Yang H, Kang B, Sun Y, et al. Synthesis and performance of the alkyl alcohol polyoxyethylene propyl ether sulfonate. Specialty Petrochemicals 2012; 29(4): 30-4.
[3]
Curbelo FDS, Neto ELB, Junior TVD, et al. Oil recovery
by ionic and nonionic surfactants and adsorption
in sandstones. Afinidad Revista De Química
Teórica Y Aplicada 2006; 63(524): 291-5.
[4]
Parekh P, Varade D, Parikh J, et al. Anionic-cationic mixed surfactant systems: Micellar interaction of sodium dodecyl trioxyethylene sulfate with cationic gemini surfactants. Colloids Surf a Physicochem Eng Asp 2011; 385(1): 111-20.
[5]
Wang L, Song X, Cao X, et al. Synergism between alkylbenzene sulfonate and nonionic surfactant for producing low interfacial tension at oil/water interface. J Dispers Sci Technol 2012; 33(5): 704-10.
[6]
Al-Faraji S, Aoudia M. Anionic-nonionic EOR surfactant mixtures for high temperature formations having high salinity and hardness. Kuwait Conference of Chemistry 2014.
[7]
Berger PD, Berger CH. 2-Alkyl alkoxylated alcohol
sulfonate:US 20120004431 A1. 2012.
[8]
Fikentscher R, Greif N, Oppenlaender K, et al. Preparation
of ether sulfonates and polyglycol ether sulfonates,
and products prepared by this method:US
4978780 A. 1990.
[9]
Wang G, Zhou M, Ding S, et al. Reaction principle of alcohol ether sulfonates by sulfonated alkylation method - A review. Tenside Surfact Det 2017; 54(1): 5-10.
[10]
Charles JN, Ned FS, Michael J, et al. Alkanesulfonate synthesis I ion catalysis of sulfite radical-ion addition to olefin. Organic Chem 1968; 33(11): 4158-65.
[11]
Minero C, Pramauro E, Pelizzetti E, et al. Micellar properties of sodium dodecylpoly(oxyethylene) sulfates. J Phys Chem 1986; 90: 1620-5.
[12]
Talley LD. Hydrolytic stability of ethoxylated sulfonates 1989; SPE18492. 301-9.
[13]
Zhao Z, Bi C, Li Z, et al. Interfacial tension between crude oil and decylmethylnaphthalene sulfonate surfactant alkali-free flooding systems. Colloids and Surfaces A 2006; 276: 186-91.
[14]
Cox MF. Effect of alkyl chain length and EO content
on AES performance Translation of daily chemical
industry 1990; 5: 1-4.