Generic placeholder image

Recent Advances in Electrical & Electronic Engineering

Author(s): Zhenhua Li*, Qiuhui Li, Li Qiu, Qi Xiong and Changzheng Deng

DOI: 10.2174/2352096511666180605094350

DownloadDownload PDF Flyer Cite As
Study of Measurement Techniques for Strong Pulsed Magnetic Field

Page: [172 - 180] Pages: 9

  • * (Excluding Mailing and Handling)

Abstract

Background: Currently, how to measure the magnetic field accurately is a difficulty in the study of strong magnetic field.

Methods: This paper summarizes several methods of measurement techniques for strong pulsed magnetic field presently, the principles and characteristics of various measurement methods are compared and analyzed. The maximum measurement intensity of electromagnetic induction method can reach 103T. The magneto-optical effect method of Faraday can measure the magnetic field intensity of 0.1~10T, and the measurement error is within 10-2T.

Results: The MOKE effect can measure a magnetic field intensity up to 100T, with an error 3×10-2T. The Zeeman effect can be measured in a magnetic field intensity of 1~20T.

Conclusion: The existential problems of various methods are described. Lastly, some solutions are proposed according to the existential problems, and the development of measurement techniques for strong pulsed magnetic field in the future is prospected.

Keywords: Strong pulsed magnetic field, measurement, electromagnetic induction, magneto-optical effect, magnetic field sensor.

Graphical Abstract

[1]
J. Shi, X. Han, J. Xie, and L. Li, “Analysis and design of a control system for the 100 T pulsed high magnetic field facility at WHMFC”, IEEE Trans.Appl. Supercond, . Vol. 26, 2016
[2]
A. Hamasaki, Y. Takeuchi, and S. Oze, Obtaining microscopic images under a high 20-T pulse magnetic field using an optimized coil., IEEE Transact. Magnet, 2017.
[3]
S. Zherlitsyn, B. Wustmann, T. Herrmannsdörfer, and J. Wosnitza, "Magnet-technology development at the Dresden high magnetic field laboratory", J. Low Temp. Phys., vol. 170, pp. 447-451, 2013.
[4]
T. Peng, F. Jiang, Q.Q. Sun, Q. Xu, H.X. Xiao, F. Herlach, and L. Li, "Design and test of a 90-T nondestructive magnet at the Wuhan national high magnetic field center", IEEE Trans. Appl. Supercond. Vol. 24, 2014
[5]
J. Shi, X. Han, J. Xie, and L. Li, “Analysis and design of a control system for the 100 T pulsed high magnetic field facility at WHMFC,” IEEE Trans.Appl. Supercond, . Vol. 26, 2016
[6]
A. Hamasaki, Y. Takeuchi, and S. Oze, Obtaining microscopic images under a high 20-T pulse magnetic field using an optimized coil., IEEE Transact. Magnet, 2017.
[7]
S. Zherlitsyn, B. Wustmann, T. Herrmannsdörfer, and J. Wosnitza, "Magnet-technology development at the Dresden high magnetic field laboratory", J. Low Temp. Phys., vol. 170, pp. 447-451, 2013.
[8]
T. Peng, “Design and test of a 90-T nondestructive magnet at the Wuhan National High Magnetic Field Center,” .IEEE Trans Appl. Supercond. Vol. 24, 2014.
[9]
G. Wu, D. Xu, B. Xiong, D. Feng, and Y. Wang, Resonant magnetic field sensor with capacitive driving and electromagnetic induction sensing.IEEE Electron Device Lett., Vol. 24, 2014.
[10]
D. Sun, D. Yu, and C. Chen, "Study of measurement techniques for strong pulsed electromagnetic field", Electron. Technol., pp. 121-123, 2015.
[11]
X. Yang, J. Yang, and H. Zhang, "Development and application of a high frequency pulsed magnetic field measurement apparatus", J. Microw, vol. 30, pp. 433-436, 2014.
[12]
Y. Li, L. Shi, C. Gao, F. Lu and L. Su, “Neural network and antenna model application on pulse magnetic field measurement, IEEE Conf. Publicat. 2011
[13]
D.E. Dick, and H.J. Wertz, >Analog and digital computation of fourier series and integrals.IEEE Transact. Electron. Comput. Vol. EC-16, 1967
[14]
L. Giaccone, D. Giordano, and G. Crotti, Identification and correction of artifact in the measurement of pulsed magnetic fields.IEEE Transact. Instrument. Measurem, . Vol. 66, 2017
[15]
M. Chen, Optimization design of intermediate frequency magnetic field spatial point metering equipment., School Inform. Eng. Guangdong Univers. Technol, 2012.
[16]
X. Kong, and Y. Xie, Electric field and magnetic field measuring system for EMP measurement based on fiber technology.High Volt. Eng., . Vol. 41, 2015
[17]
W.B. Garn, R.S. Caird, C.M. Fowler, and D.B. Thomson, "“Measurement of faraday” rotation in megagauss fields over the continuous visible spectrum Rev", Sci. Instrum. 1968.
[18]
E.H. Hwang, and B.Y. Kim, "Pulsed high magnetic field sensor using polymethyl methacrylate", Meas. Sci. Technol., 2006.
[19]
C. Fowley, S. Ouardi, and T. Kubota, "Direct measurement of the magnetic anisotropy field in Mn-Ga and Mn-Co-Ga Heusler films", J. Phys. D Appl. Phys., 2015.
[20]
P. Gu, B. Ma, and Z. Zhang, A new measurement system of longitudinal surface magneto-optic Kerr effect in large magnetic field.J. Fudan Univers. Vol. 48, 2009
[21]
"S.G. Patel, D.A. Y.-Elorriaga, A.M. Steiner; N.M. Jordan, Y.Y. Lau and R.M. Gilgenbach, “Zeeman splitting measurements of local magnetic fields in wire z-pinch plasmas", IEEE Conf. Publi. 2014
[22]
Y. Yamaguchi, H. Hashimoto, M. Kimura, M. Hirako, T. Yamaoka, and S. Tani, "Magnetic-field area sensor using poly-Si micro hall devices", IEEE Electron Device Lett., vol. 31, pp. 1260-1262, 2010.
[23]
T. Jai, A precise Hall Tesla meter for measuring 0.5~15T pulsed magnetic fields., Foreign Measurem, pp. 43-45. 1988
[24]
K. Soika and I.O. Sologub, “Measurements of strong pulsed magnetic fields by Hall effect devices, Instrum. Experim. Techniq. Vol. 53, pp.122-123, 2010