Abstract
Background: As the frequency of transformer winding faults becomes higher and
higher, the frequency response analysis used to detect the winding status has attracted more and
more attention. At present, there is still a lack of reliable and intelligent technologies for detecting
the state of transformer windings in this field.
Objective: This paper focuses on studying a high-precision method for transformer fault diagnosis,
which can be easily and effectively applied to daily life.
Methods: By changing the detection method, the traditional detection method can not distinguish
the problem that the detection data are highly overlapping when identifying the same
fault of the head and tail symmetric points, and the problem that the phase is too similar is
changed. In order to solve the problem that the fault samples of transformer frequency response
curve are scarce and the one-dimensional data cannot be read by partial deep learning
method, the one-dimensional data of frequency response curve is first converted into chracteristic
index and then into a three-dimensional image by moving window calculation method
and Gramian Angular difference field transformation. The fault classification is realized by a
convolutional neural network.
Results: The accuracy of the final model for slice classification reached 100%.
Conclusion: Illustrative examples show that the method is distinguishable from different fault
types. The traditional method only uses the amplitude of the frequency response curve, but this
method displays the two features of the amplitude-phase together in the image. Compared with
the traditional method, more features and samples are added to further improve the accuracy of
the method. The accuracy of diagnosis results reached 100%, which showed the feasibility of
the method.
Keywords:
Transformer winding, fault diagnosis, gramian angular difference field, convolutional neural network, moving windows, frequency response.
Graphical Abstract
[2]
Z.Z. Zhao, Z.Y. Xu, and J.Y. Wang, "Research on fire safety of large power transformers", High Volt. Technol., vol. 41, no. 10, pp. 3378-3384, 2015.
[5]
Z.H. Li, W.H. Jiang, and Y.G. Zhang, "Online detection method on winding deformation of trans-former based on improved ΔU-I locus method", High Volt. Appar., vol. 57, no. 08, pp. 0142-0150, 2021.
[6]
L. Guo, F.M. Jiang, and X.Y. Yu, "Fault diagnosis of autotransformer winding axial displacement using fra method based on dynamic frequency division", Zhongguo Tiedao Kexue, vol. 43, no. 01, pp. 134-143, 2022.
[7]
T. Lin, Fault Diagnosis Method of Transformer Winding Based on Multi-Level Features of FRA., Southwest Jiaotong University, 2022.
[8]
M.F. Wang, Z.G. Wang, and Z.R. Tan, "Fault diagnosis method of transformer winding based on adaptive multi-feature fusion algorithm", Transformer, vol. 58, no. 07, pp. 42-46, 2021.
[9]
L.J. Zhou, T. Lin, and F.M. Jiang, "Research on application of frequency response multistage decomposition and image features in winding faults of autotransformer", High Volt. Eng., vol. 47, no. 10, pp. 3617-3627, 2021.
[13]
Y. Xu, Y.P. Gong, and Y.W. Liu, "Transformer winding frequency response data analysis with block frequency point method", Dianli Xitong Zidonghua, vol. 38, no. 06, pp. 91-97, 2014.
[15]
C. Juan, "Application of digital image processing to measurement system of temperature field in molten pool for laser remanufacturing", Applied Laser, vol. 26, no. 04, pp. 220-222, 2006.
[16]
Y.P. Liu, H.H. Cheng, and H. Hu, "“Transformer winding deformation classification based on fre-quency response complex value and digital image processing technology”, High volt", Technol., vol. 45, no. 03, pp. 907-913, 2019.
[19]
Z.J. Liu, W. He, and H. Liu, "Transformer fault identification method based on Gramian Angular field transformation and depth compression model", Power Syst. Technol., vol. 47, no. 04, pp. 1478-1490, 2020.
[20]
S.Q. Zhang, L.Y. Du, and C.H. Wang, "Wind power forecasting method based on GAF and improved CNN-ResNet", Power Syst. Technol., vol. 47, no. 04, pp. 1540-1548, 2023.