Current Nanotoxicity and Prevention (Discontinued)

Author(s): Majid Farahmandjou* and Parastoo Khalili

DOI: 10.2174/2665980801666210225140953

Nanofabrication of Iron-Cobalt (FeCo) Alloy by Sol-gel Method

Page: [111 - 114] Pages: 4

  • * (Excluding Mailing and Handling)

Abstract

Background and Introduction: Metal oxides (MOs) have been extensively used in a large range of engineering and medical applications.

Methods: FeCo nanoparticles (NPs) were successfully synthesized by the solgel method in the presence of a powerful reducing agent-sodium borohydride (NaBH4). The structure, morphology, and optical properties of NPs were analyzed by X-ray diffraction (XRD), field effect scanning electron microscopy (FESEM), transmission electron microscopy (TEM), and Fourier transform infrared spectroscopy (FTIR) at room temperature.

Result: The XRD spectrum showed the body center cubic (BCC) structure of the samples after heat treatment at 500 °C. The SEM analysis exhibited that the particle size of as-synthesized and annealed samples was approximately 40 nm and 22 nm, respectively.

Conclusion: The TEM investigations showed the rod-shaped sample of annealed NPs. The optical studies of the FTIR analysis revealed the starching bound of Fe-Co at the frequencies of 673 cm-1, 598 cm-1, and 478 cm-1.

Keywords: FeCo, Nanorods, NaBH4, sol-gel method, morphology properties, crystal structure.

Graphical Abstract

[1]
Farahmandjou M, Soflaee F. Synthesis and characterization of α-Fe2O3 nanoparticles by simple co-precipitation method. Phys Chem Res 2015; 3: 193-8.
[http://dx.doi.org/10.22036/pcr.2015.9193]
[2]
Farahmandjou M. The study of electro-optical properties of nanocomposite ITO thin films prepared by e-beam evaporation. Rev Mex Fis 2013; 59: 205-7. https://rmf.smf.mx/ojs/rmf/article/view/3985/3952
[3]
Sebt SA, Parhizgar SS, Farahmandjou M, Aberomand P, Akhavan M. The role of ligands in the synthesis of FePt nanoparticles. J Supercond Nov Magn 2009; 22: 849-54.
[http://dx.doi.org/10.1007/s10948-009-0509-2]
[4]
Farahmandjou M, Abaeiyan N. Chemical synthesis of vanadium oxide (V2O5) nanoparticles prepared by sodium metavanadate. J Nanomed Res 2017; 5: 103.
[http://dx.doi.org/10.15406/jnmr.2017.05.00103]
[5]
Chinnasamy CN, Senoue M, Jeyadevan B, Perales-Perez O, Shinoda K, Tohji K. Synthesis of size-controlled cobalt ferrite particles with high coercivity and squareness ratio. J Colloid Interface Sci 2003; 263(1): 80-3.
[http://dx.doi.org/10.1016/S0021-9797(03)00258-3] [PMID: 12804888]
[6]
Sajjiaa M, Oubahab M, Prescotta T, Olabi AG. Development of cobalt ferrite powder preparation employing the sol–gel technique and its structural characterization. J Alloys Compd 2010; 506: 400-6.
[http://dx.doi.org/10.1016/j.jallcom.2010.07.015]
[7]
Lee SJ, Cho JH, Lee C, Cho J, Kim YR, Park JK. Synthesis of highly magnetic graphite-encapsulated FeCo nanoparticles using a hydrothermal process. Nanotechnology 2011; 22(37): 375603.
[http://dx.doi.org/10.1088/0957-4484/22/37/375603] [PMID: 21852740]
[8]
Guo Z, Henry LL, Podlaha EJ. CoFe, Fe and Co nanoparticles displacement with Cu ions. ECS Trans 2007; 3: 33-345.
[http://dx.doi.org/10.1149/1.2753266]
[9]
Wei XW, Zhu GX, Liu YJ, Ni YH, Song Y, Xu Z. Large-scale controlled synthesis of FeCo nanocubes and microcages by wet chemistry. Chem Mater 2008; 20: 6248-53.
[http://dx.doi.org/10.1021/cm800518x]
[10]
Shin SJ, Kim YH, Kim CW, Cha HG, Kim YJ, Kang YS. Preparation of magnetic FeCo nanoparticles by coprecipitation route. Curr Appl Phys 2007; 7: 404-8.
[http://dx.doi.org/10.1016/j.cap.2006.09.012]
[11]
Hesani M, Yazdani A, Abedi B, Ghazanfari M. The effect of particle size on the characteristics of FeCo nanoparticles. Solid State Commun 2010; 150: 594-7.
[http://dx.doi.org/10.1016/j.ssc.2009.12.043]
[12]
Scherrer P. Bestimmung der Grosse und der Inneren Struktur von Kolloidteilchen Mittels Rontgenstrahlen, Nachrichten von der Gesellschaft der Wissenschaften. Gottingen Mathematisch- Physikalische Klasse 1918; 2: 98-100.
[http://dx.doi.org/10.1007/978-3-662-33915-2_7]