Recent Patents on Mechanical Engineering

Author(s): Bin Liu, Yanhao Li, Fangfang Han*, Qian Qiao and Jianwen Li

DOI: 10.2174/2212797613999200607180109

Method and System for Testing the Working Characteristics of Vehicle Fuel Injector

Page: [63 - 74] Pages: 12

  • * (Excluding Mailing and Handling)

Abstract

Background: The vehicle fuel injector directly affects the power performance, emission characteristics and economic efficiency of the engine. At present, several testing standards are stipulated on accurate measurement of the working characteristics of fuel injectors.

Objective: The purpose of this study is to provide an efficient patent about the method and system for testing the working characteristics of a vehicle fuel injector.

Methods: Two key techniques are significant to establish a standard test environment. The patent about the pressure control approach and the injector driving method was proposed. The adaptive fuzzy PID approach was applied to control pressure. An adaptive multi-functional driver was designed and developed for both the voltage-driven and current-driven port fuel injectors.

Results: The experiments on the two key technologies were conducted. During the dynamic flow test, the settling time using the system was 1ms. For the static flow test, the settling time was 1 s. The maximum changing rate of pressure fluctuation was 1%. Then, the system was verified by test on the flow characteristics and dynamic response of the voltage-driven and current-driven injectors. The linear deviation of each dynamic flow curve was between ± 3% to ± 6%. Furthermore, the deviation of the dynamic flow curves from the repeated test was small. The maximum deviation of the static flow results was less than 4% and the dynamic response of the injector varied with the change of the pressure.

Conclusion: The system meets the requirements of the related standards. The experimental results prove that the system is stable and reliable.

Keywords: Adaptive fuzzy PID, dynamic response, flow characteristics, injector driver, pressure control, vehicle fuel injector.

[1]
Badawy T, Attar MA, Xu H, Ghafourian A. Assessment of gasoline direct injector fouling effects on fuel injection, engine performance and emissions. Appl Energy 2018; 220: 351-74.
[http://dx.doi.org/10.1016/j.apenergy.2018.03.032]
[2]
Liu H-C, Cho S, Hong H-S, Lee J, Lee H-J. Design and analysis of a double-layer magnetic circuit structure for high-force density hybrid fuel injector. IEEE Trans Magn 2017; 53(11): 1-5.
[http://dx.doi.org/10.1109/TMAG.2017.2707342]
[3]
Ma Q, Yurkovich S, Dudek KP. Predictive fuel dynamic control during engine start and crank-to-run transition for port fuel injected gasoline engines. 2008 American Control Conference. Seattle, WA, USA June. 2008.
[4]
Pielecha I. The influence of petrol injection parameters on the structure of geometry of fuel spray injected from outward-opening injectors. Fuel 2018; 222: 64-73.
[http://dx.doi.org/10.1016/j.fuel.2018.02.133]
[5]
Theinnoi K, Suksompong P, Temwutthikun W. Engine performance of dual fuel operation with in-cylinder injected diesel fuels and in-port injected DME. Energy Procedia 2017; 142: 461-7.
[http://dx.doi.org/10.1016/j.egypro.2017.12.072]
[6]
Edney MK, Barker J, Reid J, Scurr DJ, Snape CE. Recent advances in the analysis of GDI and diesel fuel injector deposits. Fuel 2020; 272117682
[7]
Wang L, Wu Z, Badra Jihad A, Roberts William L, Fang T. Soot characteristics of high-reactivity gasoline under compression-ignition conditions using a Gasoline Direct Injection (GDI) piezoelectric fuel injector. Fuel 2020; 265116931
[http://dx.doi.org/10.1016/j.fuel.2019.116931]
[8]
Du Jianguo MB, Jaeheon S, Fang T, Roberts WL. Auto-ignition characteristics of high-reactivity gasoline fuel using a gasoline multi-hole injector. Exp Therm Fluid Sci 2020; 112109993
[9]
Wang T, Zhang L, Chen Q. Effect of valve opening manner and sealing method on the steady injection characteristic of gas fuel injector. Energies 2020; 13(6): 1-12.
[http://dx.doi.org/10.3390/en13061479]
[10]
Hirchenhein A, Schenck Z, Joos K. Method for recognizing a state of change of a fuel injector. US10578043 (2020).
[11]
Zhang W, Zhang Z, Ma X, Awad OI, Li Y, Shuai S, et al. Impact of injector tip deposits on gasoline direct injection engine combustion, fuel economy and emissions. Appl Energy 2020; 262114538
[12]
Robel W, Crowell TJ, Wang L. . Fuel injector having cam-actuated plunger and plunger cavity metering edge for valve train noise suppression. US10570863 (2020).
[13]
John B, Martin GC, Anders JW, Campion RM. Fuel injector. US10563609 (2020).
[14]
Hogg T, Stojanovic S, Tebbs A, Samuel S, Durodola J. A benchmark study on the flow metering systems for the characterisation of fuel injectors for future heavy duty commercial vehicles. Measurement 2020; 153107414
[http://dx.doi.org/10.1016/j.measurement.2019.107414]
[15]
Lee S, Kim C, Lee S, Lee J, Kim J. Diesel injector nozzle optimization for high cng substitution in a dual-fuel heavy-duty diesel engine 2020; 262: 116607.
[16]
Hong S, Zhang X, Meinhart M, Yi JJ, Basmaji J. Multi-hole fuel injector with twisted nozzle holes. US20200032756 (2020).
[17]
Moon S. Novel insights into the dynamic structure of biodiesel and conventional fuel sprays from high-pressure diesel injectors. Energy 2016; 115(1): 615-25.
[http://dx.doi.org/10.1016/j.energy.2016.09.062]
[18]
Eliasz J, Osipowicz T, Abramek KF, Mozga L. Model issues regarding modification of fuel injector components to improve the injection parameters of a modern compression ignition engine powered by biofuel. Appl Sci 2019; 9(24): 5479.
[http://dx.doi.org/10.3390/app9245479]
[19]
Kummitha OR, Pandey KM, Gupta R. Numerical investigation of wavy wall strut fuel injector for hydrogen fueled scramjet combustor. Int J Hydrogen Energy 2019; 44(60): 32240-53.
[20]
Veronika Harantová, Zuzana Otáhalová, Martin Kasanický. Estimation of fuel consumption based on data from opening fuel injector valve. Transp Res Procedia 2019; 40: 236-43.
[http://dx.doi.org/10.1016/j.trpro.2019.07.036]
[21]
Gerlinger P, Simsont YH. Numerical investigation of scramjet strut injector cooling for different fuel mass fluxes and strut material properties at mach 8 flight conditions. Acta Astronaut 2019; 160: 353-64.
[http://dx.doi.org/10.1016/j.actaastro.2019.04.042]
[22]
Wickstone MC, Mumford DK. Hydraulically actuated gaseous fuel injector. US20190178172 (2019).
[23]
Wu D-W, Sun BG, Xu D. Deformation of nozzle, needle, and control plunger of solenoid fuel injector under high injection pressure. P I Mech Eng D-J Aut 2019; 233(7): 1767-82.
[http://dx.doi.org/10.1177/0954407018786354]
[24]
Meek GA, Panesar L, Wickstone MC. Fuel injector US10294908 2019.
[25]
Łukasz Wargula, Piotr Krawiec, Konrad Jan Waluś. Innovative research method of the fuel injector that allows to evaluate the efficiency of wood chip drive control systems. MATEC Web Conf 2019; 254: 01010.
[http://dx.doi.org/10.1051/matecconf/201925401010]
[26]
Spivey SK, Cramb DJ, Piper JS, Ramotowski MJ. Fuel injector with dual main fuel injection. US10274201 (2019).
[27]
Su J, Garmory A, Carrotte JF. On the acoustic response of a generic gas turbine fuel injector passage. J Sound Vibrat 2019; 446: 343-73.
[http://dx.doi.org/10.1016/j.jsv.2019.01.043]
[28]
Li X, Cheng Y, Ji S, Yang X, Wang L. Sensitivity analysis of fuel injection characteristics of GDI injector to injector nozzle diameter. Energies 2019; 12(434): 1-16.
[29]
Wickstone MC, Mumford DK. Hydraulically actuated gaseous fuel injector. US10247112 (2019).
[30]
Akinyemi OS, Jiang LL. Development and combustion characterization of a novel twin-fluid fuel injector in a swirl-stabilized gas turbine burner operating on straight vegetable oil. Exp Therm Fluid Sci 2019; 102: 279-90.
[31]
Hofmann O, Rixen D. Model-based identification of injector aging in common rail fuel systems. PAMM 2018; 18(1)e201800236
[http://dx.doi.org/10.1002/pamm.201800236]
[32]
Pursifull RD, Ranga APR, Surnilla G. Method and system for characterizing a port fuel injector. US20180328306 (2018).
[33]
Patel BB, Morenko O. Fuel injector for fuel spray nozzle. US20180328586 (2018).
[34]
Kumar AS, Kumar TS. Air and fuel flow interaction in combustion for various injector locations. IOP Conf Ser: Mater Sci Eng 2018; 455(1): 012028.
[35]
Kowalski M, Jankowski A. The use of laser equipment to optimize the operating parameters of the fuel injector of combustion engine. J KONES 2018; 25(4): 197-206.
[36]
Thibault T, Rodier N. Fuel injector. US20180313316 (2018).
[37]
Liu H-C, Lee H-J, Lee J. Design of a double-path magnetic circuit structure hybrid fuel injector considering demagnetization characteristics. J Electron Mater 2019; 48: 1421-8.
[38]
Xiao J, Song H, Yang X, Yu K, Huang Z, Yin Q, et al. Experimental study on the effects of nozzle temperature on internal deposits of a gasoline direct injector. Energy Fuels 2018; 32(9): 8978-85.
[http://dx.doi.org/10.1021/acs.energyfuels.8b01195]]
[39]
Meek GA, Panesar L. Fuel injector. US20180274506 (2018).
[40]
Slavchov RI, Mosbach S, Kraft M, Pearson R, Filip SV. An adsorption-precipitation model for the formation of injector external deposits in internal combustion engines. Appl Energy 2018; 228: 1423-38.
[41]
Dudzik K. Analysis of the possibility of using acoustic emission for monitoring technical condition of the fuel injector in 3AL25/30 engine. New Trends Prod Eng 2018; 1(1): 419-25.
[42]
Pitcel MD, Procknow DW, Zuehl J, Kratz , David A. Fuel delivery injector. US20180252191 (2018).
[43]
Zu Schweinsberg AS, Hirchenhein A, Joos K, Amler M, Bauer M, Hess W. Method for determining an opening delay of a fuel injector. US10060381 (2018).
[44]
Więcławski K, Mączak J, Szczurowski K. Control of fuel through the injector, based on the observation of the electric current waveform. IOP Conf Ser: Mater Sci Eng 2018; 421(2): 022040.
[45]
Dudar AM. Fuel injector diagnostics in a variable displacement engine. US20180216562 (2018).
[46]
G.V. Lomakin, V.E. Lazarev, V.M. Myslyaev. Experimental estimation of influence of fuel injector nozzle design on output parameters of tractor diesel. ICIE 2018; pp. 119-26.
[47]
Stepien Z, Mazanek A, Suchecki A. . Impact of fuel on real diesel injector performance in field test P I Mech Eng D-J Aut 2018; 232(8): 1047-59.
[http://dx.doi.org/10.1177/0954407017725671]
[48]
Ismael MA, Heikal MR, Aziz ARA, Syah F, Zainal FZA, Crua C. The effect of fuel injection equipment on the dispersed phase of water-in-diesel emulsions. Appl Energy 2018; 222: 762-71.
[49]
Wu Z, Wang L, Badra JA, Roberts WL, Fang T. GDI fuel sprays of light naphtha, PRF95 and gasoline using a piezoelectric injector under different ambient pressures. Fuel 2018; 223: 294-311.
[50]
Thirunavukkarasu R, Mahendran M, Tamilselvan R, Periyasamy S. Investigation on single, four and five holes fuel injector nozzle on performance and emission characteristic of diesel on a VCR engine by using ceramic coating material on the piston crown. Materials Today: Proceedings 2018; 5(2): 7577-85.
[51]
Luo T, Jiang S, Moro A, Wang C, Zhou L, Luo F. Measurement and validation of hole-to-hole fuel injection rate from a diesel injector. Flow Meas Instrum 2018; 61: 66-78.
[52]
Alias MHR, Rahim MFA, Rodzi MHMI, Bakar RA. Effect of injection pressure, injection duration, and injection frequency on direct injector’s mass flow rate for compressed natural gas fuel. MATEC Web Conf 2018; 225.02008.
[53]
Wickstone MC, Mumford DK. Hydraulically actuated gaseous fuel injector. US20180073447 (2018).
[54]
Kim T, Park S. Modeling flash boiling breakup phenomena of fuel spray from multi-hole type direct-injection spark-ignition injector for various fuel components. Energy Convers Manage 2018; 160: 165-75.
[http://dx.doi.org/10.1016/j.enconman.2018.01.042]
[55]
Kolhouse SJ, Primus RV, Peters LL, Buchanan DL. Fuel cooled injector tip. US9897053 (2018).
[56]
Mórawski L, Trawiński G. Study on fuel injector with hydraulic amplifier (HADI) on the example of Mercedes-Benz Actros vehicle with Om 471.9 engine. J KONES 2018; 25(1): 307-16.
[57]
Kumar NS, Govindasamy P. Design and evaluation of fuel injector for biodiesel injections using sequential fuel injection. J Comput Theor Nanosci 2018; 15(2): 690-6.
[58]
Park J, Lee K-H, Park S. Comprehensive spray characteristics of water in port fuel injection injector. Energies 2020; 13(2): 396.
[59]
Hoang AT, Le VV, Pham VV, Tham BC. An investigation of deposit formation in the injector, spray characteristics, and performance of a diesel engine fueled with preheated vegetable oil and diesel fuel. Energ Source Part A 2019; 41(23): 2882-94.
[60]
Chang M, Park S. Evaporation characteristics of ethanol as alternative fuel in direct injection injector under high-temperature conditions. Fuel 2019; 252: 427-38.
[61]
de Goede S, Barbour R, Velaers A, Sword B, Burton D, Mokheseng K. The effect of near-zero aromatic fuels on internal diesel injector deposit test methods. SAE Int J Fuels Lubr 2017; 10(1): 163-83.
[62]
Kassandra Makri, Russel Lockett, Mahesh Jeshani. Dynamics of post-injection fuel flow in mini-sac diesel injectors Part 1: Admission of external gases and implications for deposit formation. International Journal of Engine Research 2019; 1-47.
[63]
Zhang X, Palazzolo A, Tucker R, Kascak A, Kweon C-B. Flash vapor fuel injector development. Int J Engine Res 2016; 17(6): 646-65.
[64]
Smith A, Williams R. Linking the physical manifestation and performance effects of injector nozzle deposits in modern diesel engines. SAE Int J Fuels Lubr 2015; 8(2): 344-57.
[65]
Jaime G, Pedro M-A, Marcos C, Jesús PE. Effect of the nozzle holder on injected fuel temperature for experimental test rigs and its influence on diesel sprays. Int J Engine Res 2018; 19(3): 374-89.
[66]
Low Pressure Gasoline Fuel Injector. Society of Automotive Engineers 2001.
[67]
GB/T 25363-2010 Electromechanical Solenoid Fuel Injector Assemblies of Gasoline Engines-Testing methods. General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of The People's Republic of China; 2010.
[68]
QC/T 967-2014 Port fuel injector for gasoline engine. Ministry of Industry and Information Technology of the People's Republic of Chinna, National Technical Committee of Auto Standardization; 2014.
[69]
Guo H, Gao W, Liu X, Zhang Z. Study on measurement system of the dynamic performances for an electronic fuel injector. 2010 International Conference on Measuring Technology and Mechatronics Automation. Changsha City, China, March, 2010.
[http://dx.doi.org/10.1109/ICMTMA.2010.527]
[70]
Nouraei H, Ben-Mrad R, Sinclair AN. Development of a piezoelectric fuel injector. IEEE T Veh Technol 2015; 65(3): 1162-70.
[http://dx.doi.org/10.1109/TVT.2015.2410136]
[71]
Liu F, Li Z, Wang Z, Dai X, He X, Lee C-F. Microscopic study on diesel spray under cavitating conditions by injecting fuel into water. Appl Energy 2018; 230: 1172-81.
[http://dx.doi.org/10.1016/j.apenergy.2018.09.038]
[72]
Wu Z, Wang L, Badra JA, Roberts WL, Fang T. GDI fuel sprays of light naphtha, PRF95 and gasoline using a piezoelectric injector under different ambient pressures. Fuel 2018; 223: 294-311.
[http://dx.doi.org/10.1016/j.fuel.2018.03.009]
[73]
Wang L, Badra JA, Roberts WL, Fang T. Characteristics of spray from a GDI fuel injector for naphtha and surrogate fuels. Fuel 2017; 190: 113-28.
[http://dx.doi.org/10.1016/j.fuel.2016.11.015]
[74]
Hart GR, Nehoda CJ. Fuel injection system tester. US5020362 (1991).
[75]
Slaymaker JT, Wong APCA, Nolan A, Buiquang PB, Lanksch M. Method and system for estimating fuel system integrity. US9133783 (2015).
[76]
Pearce RR, Peters MW, Dudar AM, Yang DS-M. Systems and methods for determining the integrity of a vehicle fuel system. US9669705 (2017).
[77]
Yang J, Shen T, Jiao X. Model-based stochastic optimal air-fuel ratio control with residual gas fraction of spark ignition engines. IEEE Trans Contr Syst Technol 2013; 22(3): 896-910.
[http://dx.doi.org/10.1109/TCST.2013.2272832]
[78]
Xue W, Bai W, Yang S, Song K, Huang Y, Xie H. ADRC with adaptive extended state observer and its application to air-fuel ratio control in gasoline engines. IEEE Trans Ind Electron 2015; 62(9): 5847-57.
[http://dx.doi.org/10.1109/TIE.2015.2435004]
[79]
Priyanka E, Maheswari C, Thangavel S. Online monitoring and control of flow rate in oil pipelines transportation system by using PLC based Fuzzy-PID Controller. Flow Meas Instrum 2018; 62: 144-51.
[http://dx.doi.org/10.1016/j.flowmeasinst.2018.02.010]
[80]
Choi HH, Yun HM, Kim Y. Implementation of evolutionary fuzzy PID speed controller for PM synchronous motor. IEEE Trans Industr Inform 2013; 11(2): 540-7.
[http://dx.doi.org/10.1109/TII.2013.2284561]
[81]
Kudinov Y, Kolesnikov V, Pashchenko F, Pashchenko A, Papic L. Optimization of fuzzy PID controller’s parameters. Procedia Comput Sci 2017; 103: 618-22.
[http://dx.doi.org/10.1016/j.procs.2017.01.086]